Ceramic Clay Bar Detail Kit

1. Open and inspect the clay bar to ensure there are no visible contaminants.

2. Lubricate a small section using the quick detail spray of the vehicle surface (approximately 2ft by 2ft) as well as the clay bar itself with a mist of Quick Detail Spray.

3. With mild pressure, glide the clay bar in slow yet deliberate "back-and-forth" motions across the vehicle surface, following the body lines of the vehicle (DO NOT move perpendicularly or in circles, as this could cause damage if large contaminants are picked up!).

4. When you no longer feel tension on the body of the vehicle with the clay bar, that section is complete. Once each section is completed, wipe clean with a microfiber towel.

5. Roll, knead, and reshape the clay bar every time it is used on a fresh area.

6. Continue onto each new section, until you have gone over all exterior surfaces.

Now you are ready to use the Nexgen Ceramic Spray.

1) Ensure surface is clean and dry before application.

2) Lightly mist the Ceramic Spray onto individual body panels of the vehicle and use a clean microfiber towel to rub the spray in.

3) Use a clean dry microfiber towel and lightly buff out to a high gloss.

4) If haziness is still present repeat steps 3 and 4.

Note: Multiple Dry microfiber towels will be required for this process.

Free standard shipping on any order above $75.

With a Nexgen VIP Membership, you will receive FREE shipping with every order.

Otherwise, shipping cost will be determined by the quantity of product in your order, and packages are primarily carried by DHL. Your shipping and satisfaction are guaranteed, and we have a simple money-back promise if, for any reason, you’re not totally happy with your Nexgen products.